Production line of mechanical shaft kiln

Two way pressure system solid fuel automatic mechanical shaft kiln production line

Product introduction

The shaft kiln system of the solid fuel automatic machine is mainly composed of raw material weighing, batching system, vertical kiln feeding system, cloth system, calcining system, discharging system and smoke removing and dust removal system.

The qualified limestone and anthracite (block, ball) and coke are stored in the silo, respectively. Through weighing, blending system and uniform mixing to the feeding system of the shaft kiln, the feeding trolley is sent to the kiln top transition material trough, and the kiln top cloth system is evenly distributed in the kiln, calcined and cooled from the discharging system evenly. Out of the kiln.

The cooling wind is sent from the bottom of the kiln into the inner cooling zone of the kiln and the calcined lime to heat exchange and cooling the lime to below 100 centigrade, and the cooling air is preheated to 800 C.

Automatic control of the whole system by microcomputer. To operate steadily.

The pressure system of the shaft kiln adopts two way pressure system. The purpose of improving the utilization coefficient of kiln is to be achieved.

The dust emission of all the system points conforms to the national emission standards. Make the lime plant into the garden factory.