The detailed introduction of the product:
Disc feeder is a kind of volume feeding equipment that was widely used, which can even continuously feed the materials to the next equipment, and the feeding volume can be adjusted, the equipment can feed power , small block material (such as coal, clay, etc.), it is the general mill, dryer commonly used equipment.
Disc feeder is composed by drive device, feeder ontology, belt conveyor that used for measurement and measurement device. Feeder and belt conveyor are driven by a set of device drivers; the electromagnetic clutch of this drive device has the functions of realization of stop, open and the conversion of combining functions.
The measurement belt speed of belt conveyer is less than 1m/s, to avoid deflection of weighing roller, so the detection pole was installed to adjust the deflection.
main technical parameter

model	Specification(mm)	Weight(t)	Design capacity(t/h)	Main technical performance	motor
model	Specification(mm)	Weight(t)	Design capacity(t/h)	Main technical performance	model	Power(kw)
DKM60	Φ600	0.46	0.043-0.244	Maximum material granularity is 25mm Maximum speed is 0.5r/min	⑴YCJ132B347.5r/min ⑵Z2-31(D2)	0.55 0.8
DKM80	Φ800	0.56	0.15-0.96	Maximum material granularity is30mm Maximum speed is1r/min	⑴YCJ132B347.5r/min ⑵Z2-31(D2)	0.55 0.8
DKM100	Φ1000	0.89	0.345-2.22	Maximum material granularity is40mm Maximum speed is1r/min	⑴YCJ160B344r/min ⑵Z2-32(D2)	1.5 1.1
DK600	Φ600	0.41	0.69-3.9	Maximum material granularity is25mm Maximum speed is8r/min	⑴Y90L-6 ⑵Z2-32(D2)	1.1 1.1
DK800	Φ800	0.5	1.18-7.56	Maximum material granularity is30mm Maximum speed is8r/min	⑴Y90L-6 ⑵Z2-32(D2)	1.1 1.1
DK1000	Φ1000	0.79	2.59-16.7	Maximum material granularity is40mm Maximum speed is7.5r/min	⑴Y100L-6 ⑵Z2-41(D2)	1.5 1.5
DK1300	Φ1300	1.11	4.28-29.9	Maximum material granularity is 50mm Maximum speed is 6.5r/min	⑴Y132S-6 ⑵Z2-51(D2)	3 3
DK1600	Φ1600	2.02	7.03-48.6	Maximum material granularity is 60mm Maximum speed is 6r/min	⑴Y132M1-6 ⑵Z2-61(D2)	4 4
DK1800	Φ1800	2.84	9.26-60	Maximum material granularity is70mm Maximum speed is 5r/min	⑴Y132M2-6 ⑵Z2-61(D2)	5.5 5.5
DK2000	Φ2000	3.1	13.6-88.4	Maximum material granularity is 80mm Maximum speed is 5r/min	⑴Y132M2-6 ⑵Z2-61(D2)	5.5 5.5
DK1000	Φ1000	0.94	14	Maximum material granularity is50mm Maximum speed is7.5r/min	Y112M-6	2.2
DK1500	Φ1500	1.56	25	Maximum material granularity is50mm disc speed is7.5r/min Adjust diameter900mm Natural inclination is 30°	Y132M1-6	4
CK2000	Φ2000	2.07	100	Maximum material granularity is50mm Disc speed is7.5r/min Adjust diameter1270mm Natural inclination is 30°	Y160M-6	7.5
FB1000	Φ1000	1.2	13	Maximum material granularity is50mm Maximum speed is 7.7r/min	Y132S-6	3
FB1500	Φ1500	3.1	30	Maximum material granularity is 50mm Maximum speed is 6.3r/min	Y160M-6	7.5
FB2000	Φ2000	5.2	80	Maximum material granularity is50mm Disc speed is4.8r/min Humidity 15% proportion≤2.25tm³	Y160L-6	11
FB2500	Φ2500	6.9	120	Maximum material granularity is50mm Humidity 15% proportion≤2.25tm³	Y180L-6	15
FB3000	Φ3000	13.57	75-225	≤2.25tm3 Maximum material granularity is50mm Disc speed is3.2r/min Humidity 15% proportion≤2.25tm³	⑴Y200L2-6 ⑵Z2-92	22 22
DB600	Φ600	0.46	0.69-3.9	Maximum material granularity is 25mm Maximum speed is 8r/min	⑴Y90L-6 ⑵Z2-32(D2)	1.1 1.1
DB800	Φ800	0.55	1.18-7.65	Maximum material granularity is 30mm Maximum speed is 8r/min	⑴Y90L-6 ⑵Z2-32(D2)	1.1 1.1
DB1000	Φ1000	0.87	2.59-16.7	Maximum material granularity is 40mm Maximum speed is 7.5r/min	⑴Y100L-6 ⑵Z2-41(D2)	1.5 1.5
DB1300	Φ1300	1.24	4.28-27.9	Maximum material granularity is 50mm Maximum speed is 6.5r/min	⑴Y132S-6 ⑵Z2-51(D2)	3 3
DB1600	Φ1600	1.68	7.03-48.9	Maximum material granularity is60mm Maximum speed is 6r/min		4 4
DBS1000	Φ1000	0.96	2.59-16.7	Maximum material granularity is 40mm Maximum speed is 7.5r/min	⑴Y100L-6 ⑵Z2-41(D2)	1.5 1.5
DBS1600	Φ1600	2.31	7.03-48.6	Maximum material granularity is 60mm Maximum speed is 6r/min	⑴Y132M1-6 ⑵Z2-52(D2)	4 4
GM60	Φ600	0.58	5t/h	Maximum material granularity is50mm Maximum speed is 7.5r/min Allowable moisture is12%	Y100L-6	1.5
GM85	Φ850	0.68	With GM85-202 type cylinder lid body is20 t/h, With GM85-302 type cylinder lid body is30 t/h	Maximum material granularity is 50mm Maximum speed is 12.2r/min Allowable moisture is12%	Y112M-6	2.2

Oxidized pellet production line

Tailings recovery machine